Lightbullet

Bifferboard

First startup of the Bifferboard

After some preparations like uploading the latest firmware to the Bifferboard and connecting a RS232 level converter, it was time to startup the Bifferboard. After some kernel messages the BusyBox came up and the Bifferboard was up and running.
Below is the final message shown in minicom and some pictures of the entire setup.

BusyBox v1.11.3 (2009-05-08 21:37:54 BST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

Biffroot v1.4
=============
Bifferboard profile based on OpenWrt Kamikaze.
See http://www.bifferos.com for info.
root@OpenWrt:/#

Output at minicom

Bifferboard with pin connector

RS232 level converter

Final setup